Breadboard Arduino Kit - ATmega328P-PU DIP28 with Arduino Bootloader and parts - Ten Pack
$111.95
SKU 175026X
Making your own Arduino Uno-compatible projects on a solderless breadboard or other DIY solution? Setting up for a class, hackerspace or large job?
Then order this Microchip ATmega328P-PU DIP28 Microcontroller from PMD Way.
You receive the basics - ten each of the following items listed:
- ATmega328P-PU DIP28 Microcontroller with Arduino Bootloader (optiboot)
- matching DIP IC socket
- 7805 DC linear power regulator (7~12VDC in, 5VDC out @ 1 A)
- 16 MHz crystal oscillator
- two 22 pF ceramic capacitors
- 0.1 uF electrolytic capacitor
- 0.33 uF electrolytuc capacitor
- Click here for solderless breadboards
Click here for individual pack orders
The ATMEGA328-PU is a low power CMOS 8 bit microcontroller based on the AVR enhanced RISC architecture. By executing powerful instructions in a single clock cycle, the ATMEGA328-PU achieves throughputs approaching 1MIPS per MHz allowing the system designer to optimize power consumption versus processing speed.
- 131 powerful instructions - Most Single Clock Cycle Execution
- 32 x 8 general purpose working registers
- Fully static operation
- Up to 20MIPS throughput at 20MHz
- On-chip 2-cycle multiplier
- Write/erase cycles: 10,000 flash/100,000 EEPROM
- Optional boot code section with independent lock bits
- In system programming by on chip boot program
- True read while write operation
- Programming lock for software security
- Atmel® QTouch® library support
- Capacitive touch buttons, sliders and wheels
- QTouch and QMatrix® acquisition
- Up to 64 sense channels
- Two 8-bit timer/counters with separate prescaler and compare mode
- One 16-bit timer/counter with separate prescaler, compare mode, and capture mode
- Real time counter with separate oscillator
- Six PWM channels
- Programmable serial USART
- Master/Slave SPI
Visit the Microchip website for data sheets and more information.
Free delivery worldwide within ten days to four weeks.