This 3D-Printed Simpsons TV Isn't Just for Show — It Plays the Entire First 11 Seasons, Too

from hackster.io

Pseudonymous maker "buba447" has 3D-printed a replica of the TV seen in the Simpsons' living room — and, thanks to a Raspberry Pi Zero hidden away inside, it even works.

"I designed and printed a working Simpsons TV. [It] plays the first 11 seasons at random. Inside [the TV] is a Raspberry Pi Zero with a 32gb SD card," buba447 explains. "The Pi is connected to a 640x480 TFT display. The Pi is running [Raspberry Pi OS] Jessie Lite. The episodes were all compressed specifically for the screen and loaded onto the SD card."

"When the Pi is powered up, through the USB port on the back of the TV, it starts playing episodes at random. When on episode ends the next is randomly selected. The top button is wired up to GPIO and turns the screen on and off while also muting the volume. The bottom is a [potentiometer] that is connected to the speaker inside."

The system is entirely autonomous: When power is applied, the Raspberry Pi Zero boots and begins playback. Episodes play continuously: While the TV's top button turns the display on and off, it doesn't pause playback — meaning time passes even with the TV switched off, just as it would when the episodes were originally broadcast.

Buba447 already has some ideas for upgrades, saying there's "plenty of space" inside to add a battery and charging circuitry so the TV can operate without a USB cable attached. The maker has also promised to publish a build guide at some point in the future, and jokes that if Disney — the current owner of the Simpsons intellectual property rights — sees the thread, they should offer a research and development job.

More details are available on the project's Reddit thread.