RS485 1.8" Four Digit Seven Segment Display Module

If you need a large, clear, and easy-to-read numeric display for data from an RS485 bus, this 1.8" Four Digit Seven Segment Display Module from PMD Way solves the problem/ 

Free delivery, worldwide.

Specifications:

• Power supply current: DC 10-36v, recommended 12v or 24v power supply; current 50ma at 24V,
• Serial port parameters: start bit: 1, stop bit: 1, data bit: 8, parity bit: no parity
• Communication protocol: modbus/ascii protocol
• Input interface: RS485/counter/analog (counter and analog need to be customized)
• Opening size: physical size 163 x 84MM recommended opening 163.5MM x 84.5MM
• Product size: 172 x 94 x 30 (mm)
• Baud rate: 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200
• Interface parameters
• Terminal model: KF2EDG3.81-10P (whole pluggable) VCC: positive power supply GND: negative power supply 485A: rs485 bus A (485 bus and GND terminal are common ground)
• 485B: rs485 bus B 232-RX: rs232 bus RX COM: (input common pin) INC: (plus 1) DEC: (minus 1) CLR: (clear) SET: reserved function

Function:

• rs485 communication, support Modbus RTU protocol, automatic protocol identification
• Support stroke brightness adjustment function, with seven levels of brightness
• It can display various ASCII characters such as integers, negative numbers, decimal points, ABCDEFPL, etc.
• Support the electronic label function, the initial display content can be set after power-on, and it is widely used in storage location number labels. For example, "A001", "B002" and so on are displayed. Support counting display function
• Support to modify the baud rate (1200-115200), covering several commonly used baud rates, a bus can be connected to 128 digital tubes, etc.