You know you want to do things with Arduino. You know you want all sorts of sensors, actuators, wires and other bits but not sure what to get. Don't panic, PMD Way has solved your dilemma with our Value Starter Parts Bundle for Arduino.

This kit includes the most commonly-used parts that beginners experiment with all in one box. There's a bunch of example projects around the Internet that use them, so you can benefit from others' fun and inspiration.

And you are not alone, we're here to offer technical support with your kit and other parts from PMD Way.

Your value starter parts bundle will include:

  • Arduino Uno-compatible board
  • USB cable for power and uploading code (Arduino sketches)
  • 9V battery to DC plug cable for autonomous use
  • female to male jumper wires
  • 65 male to male jumper wires
  • small servo
  • inline header pins that can be soldered to the Uno board (not mandatory, however you may do this later)
  • Single digit 7 segment numeric LED display
  • Four digit 7 segment numeric LED display
  • 8x8 LED matrix display
  • 74HC595 shift register IC
  • LM35DZ temperature sensor
  • RGB LED module
  • analog sound sensor module
  • DS1302 real-time clock IC module
  • water level sensor module
  • RC522 NFC wireless card reader and two tags
  • 16x2 character LCD display with I2C two-wire interface
  • small stepper motor and control board
  • 4x4 button matrix keypad
  • infra-red remote control and receiver
  • analog joystick module
  • single channel relay module
  • 5 red LEDs
  • 5 blue LEDs
  • 5 yellow LEDs
  • variable resistor
  • active buzzer
  • passive buzzer
  • four buttons and caps
  • light dependent resistor
  • 830 point solderless breadboard
  • various resistors for use with LEDs and buttons
  • technical support from PMD Way staff

Arduino board USB Drivers:

Click here for our CH34X USB driver download and installation guide.

Arduino board Specifications

  • Microcontroller  -  ATmega328P SMD
  • Operating Voltage  -  5V
  • Input Voltage (recommended) - 7-9V
  • Input Voltage (limit)  - 6-9V
  • Digital I/O Pins  - 14 (of which 6 provide PWM output)
  • PWM Digital I/O Pins -  6
  • Analog Input Pins  -  6
  • DC Current per I/O Pin  -  20 mA
  • DC Current for 3.3V Pin  -  50 mA
  • Flash Memory    32 KB (ATmega328P) of which 0.5 KB used by bootloader
  • SRAM  -  2 KB (ATmega328P)
  • EEPROM  -  1 KB (ATmega328P)
  • Clock Speed  -  16 MHz
  • LED_BUILTIN  -  13
  • Length -   68.6 mm
  • Width  -  53.4 mm
  • Weight  - 25 g

Arduino Uno R3 Pinouts