Arduino Nano Compatible Ethernet Bundle
Want an Arduino Nano-compatible board with Ethernet and some room for expansion? Then save money with this Ardunino Nano Compatible Ethernet Bundle from PMD Way.
You receive an Arduino Nano v3.0 compatible board, the matching ENC28J60 Ethernet module AND a terminal shield kit.
Inline header pins are included, and require soldering. The terminal shield kit will also require soldering (see below).
It provides the function of an Arduino Duemilanove in a much smaller, breadboard-friendly form factor - and you have the extra two analogue inputs thanks to the SMD version of the ATmega328. USB connection is via a mini socket.
This Nano-compatible uses the CH340G serial to USB chip instead of the older FTDI chip. This works perfectly as a USB-serial just like the FTDI chip does, but is cheaper. We have tested this and have links for the drivers below. Header pins are included but do require soldering.
Click here for our CH34X USB driver download and installation guide.
- Microcontroller Atmel ATmega328
- Operating Voltage (logic level) 5 V
- Input Voltage (recommended) 7~12 V
- Input Voltage (limits) 6-20 V
- Digital I/O Pins 14 (of which 6 provide PWM output)
- Analog Input Pins 8
- DC Current per I/O Pin 40 mA
- Flash Memory: 32 KB of which 2 KB used by bootloader
- SRAM: 2 KB
- EEPROM: 1 KB
- Clock Speed 16 MHz
- Dimensions 0.73" x 1.70"
- Length: 45 mm
- Width: 18 mm
Easily add Ethernet networking capabilities to your Arduino Nano or compatible board with this ENC28J60 Ethernet shied for Arduino Nano from PMD Way.
Your Nano can either drop into the top of the shield (so you then trim the pins from the bottom), or you could insert the shield into a Nano with empty holes (leaving a gap to insulate the two PCBs) and solder it in that way.
There are a few Arduino libraries you can select from, however the best availale at the moment is the EtherCard library available on Github.
Don't forget to order your Ethernet cables!
Terminal Shield kit:
Now available from PMD Way are these useful terminal shield kits for the Arduino Nano and compatible boards. Once assembled you have easy access to the Nano's pins with solid terminal headers, and the Nano itself can be removed thanks to the convenient rows of socket pins.
PCB colour may vary.
When you are assembling your shield, click all the terminal blocks for one side together before soldering them into the PCB! For example: