MAG3110 Triple Axis Magnetometer Breakout
Now available from PMD Way is this neat Triple Axis Magnetometer Breakout - based on Freescale’s MAG3110 - a small, low-power, digital 3-axis magnetometer.
The device can be used in conjunction with a 3-axis accelerometer to produce orientation independent accurate compass heading information. It features a standard I2C serial interface output and smart embedded functions. I
t’s also a tiny QFN package which isn’t very easy to play with so here is our easy to use breakout board. This board breaks out all of the pins for the MAG3110 to a standard 0.1" header and also supplies the necessary filtering capacitors so that you can easily use it in your next navigation project.
Inline header pins are included but not soldered to the board. Board is both 3.3V and 5V compatible for power and I2C bus.
- 3.3 to 5V Supply Voltage
- 7-bit I2C address = 0x0E
- Full Scale Range ±1000 μT
- Sensitivity of 0.10 μT
- Pull Up Resistor Jumper
- 13.3 x 14.5 mm
- based on open-source design by Sparkfun
- Hookup Guide
- Datasheet (MAG3110)
- Example Code
- GitHub (Libraries)