Skip to content
Free delivery, every order. Want a bulk deal or can't find what you need? Email support@pmdway.com now!
Free delivery, every order. Want a bulk deal or can't find what you need? Email support@pmdway.com now!

Tiny 4 to 24V DC to Adjustable Output 3A DC DC Buck Converter Module - Twin Pack

$10.95
SKU 71235280

Now available from PMD Way is this incredibly tiny DC to DC buck converter module. It has an input voltage range of 4 to 24V DC, and has both an adjustable voltage output and fixed output ranges of:

  • 1.8V DC
  • 2.5V DC
  • 3.3V DC
  • 5V DC
  • 9V DC
  • 12V DC

Naturally the input voltage needs to be greater than the required output voltage. These modules are ideal for replacing classic 78XX-style power regulator-based power supplies in your projects, and will save you time and money. Check out the impressive specifications below.

This buck converter doesn't use electrolytic capacitors, instead - high-quality MLCC-type which last much longer and won't explode. Furthermore, the use of high-current low-resistance inductors on the switchmode converter allow for high efficienct and low-temperature operation. 

Modules are sold in packs of two. Please click here for packs of twenty.

Specifications:

  • Input voltage range: 4~24V DC
  • Adjustable output range: 0.8~17V DC
  • Fixed output ranges: 1.8, 2.5, 3.3, 5, 9 and 12V DC
  • Output current up to 3A (up to 18W without heatsink)
  • Efficiency at 6.5V to 5V 0.7A - 97.5%
  • Efficiency at 12V to to 5V 1A - 94%
  • Quiescent current: 0.85mA
  • Switching frequency: 500kHz
  • Output ripple: 20mV (12V to 5V 3A)
  • Load adjustment rate: ±1%
  • Voltage regulation rate: ±0.5%
  •  
    Dynamic response speed: 5% 200uS
  • Operating temperature: -40 to 85 degrees Celsius

Using your module:

Review the rear of the module as shown below:

Tiny 4 to 24V DC to Adjustable Output 3A DC DC Buck Converter Module in packs of two from PMD Way with free delivery worldwide
  • PCB pads use standard 0.1"/2.54mm pin spacing
  • Connect both input and output -/GND to the GND pin
  • Connect your input voltage to the IN+ pin
  • Your voltage output (+) is the V0+ pin
  • You can turn the board on or off by setting the EN pin HIGH or LOW respectively
  • To select a fixed output voltage, simply bridge the two solder pads adjacent the voltage label you need
  • To select the adjustable voltage output, ensure no other solder pads are bridged, then bridge the ADJ pads. Then you can use the onboard potentiometer to adjust your voltage output

Dimensions:

Tiny 4 to 24V DC to Adjustable Output 3A DC DC Buck Converter Module in packs of two from PMD Way with free delivery worldwide