NJK-5002C Hall Effect Proximity Switch with 1.2m lead and mount
Now available from PMD Way is the popular NJK-5002C NPN normally-open proximity switch.
Manufactured from nickel-plated brass and ABS plastic, this sensor will last and is rated for IP67 level dust and water resistance (dust-proof and can be submerged in water for up to 30 minutes).
A red LED indicated that it is working, and is ideally tripped by a magnet. (We also sell magnets).
- Type: NPN NO
- Mounting way: Screen shield type
- Detection distance: 10mm±10%
- Set distance: 0~8mm
- Response frequency: 1 kHz
- Delay distance: 10% below of the detection distance
- Detection object: Magnetic metal (the detection distance decrease when it is non-magnetic metal)
- Supply voltage: DC 6-36V
- Consumption current: Below 300mA
- Loop protection: Reversal connection protection, surge absorption, load short-circuit protection
- Ambient temperature & humidity: -30~+65 °C, 35~95% RH
- Insulation impedance: Above 50 MΩ between charging part and housing
- Withstand voltage: AC 1000V 50/60Hz 1min between charging part and housing